>
Spare parts and accesories
>
Classico
>
Engine and parts
>
Clutches, plates and instruments
>
Complete clutch 5 discs for Vespa 50 Special-NLR / 90/125 Primavera ET3-PK-ETS
Crimaz
- Safe payment
- Easy return
- Spedizione gratuita a partire da €:
-
Customer care service +39 0543 85540From Monday to Friday: 9.00-12.30 and 14.00-17.30
Saturday: 9.00-12.00
Complete clutch 5 discs for Vespa 50 Special-NLR / 90/125 Primavera ET3-PK-ETS
item code: 07-BO-103-CR
Shipping time:
24/48 hours
price:
380,00 €
311,48 € + VAT
3x 126,67 €
nessuna commissione
Modelli
models 50cc
Vespa 50 N V5A1T
, Vespa 50 L V5A1T
, Vespa 50 R V5A1T
, Vespa 50 Sprinter V5SS2T
, Vespa 50 Special V5A2T
, Vespa 50 Elestart V5A3T
, Vespa 50 Special V5B1T
, Vespa 50 Elestart V5B2T
, Vespa 50 Special V5B3T
, Vespa 50 Elestart V5B4T
, Vespa 50 PK V5X1T
, Vespa 50 PK S V5X2T
, Vespa 50 PK S Elestart V5X2T
, Vespa 50 PK XLS V5S2T
, Vespa 50 PK XL V5X3T
, Vespa 50 PK XL Elestart V5X3T
, Vespa 50 RUSH V5X4T
models 80-90cc
Vespa 90 V9A1T
, Vespa 90 SS V9SS1T
, Vespa 90 Racer V9SS2T
models 125cc
Vespa 125 Nuova VMA1T
, Vespa 125 Primavera VMA2T
, Vespa 125 Primavera ET3 VMB1T
, Vespa 125 ETS VMS1T
, Vespa 125 PK S VMX1T
, Vespa 125 PK S VMX5T
, Vespa 125 PK S Elestart VMX5T
, Vespa PK 125 S Automatica VAM1T
, Vespa 125 PK XL VMX6T
, Vespa 125 PK XL Elestart VMX6T
technical specifications
The new CM5 is a TOP of the range clutch which allows ours
wasp / bee to function properly with powers greater than 30 hp
without having to add shims between the engine casing and the clutch casing.
Included are n. 5 guranite discs with latest material
generation (thickness 2.00mm) n. 4 hardened metal discs (thickness
1.20mm) n. 2 compression springs with increased load, spider from
full, seeger with anti rotation notch, pressure plate take oil with
bearing, key + washer + very high strength nut. For
reduce the considerable resistance of the springs on the clutch lever is
It is mandatory to use a clutch cover with reduction gear a
rack combined with a handlebar lever with fulcrum-ball center distance
minimum 25.00mm.
Richiedi informazioni
Articoli correlati
