Sezione speciale 6

Die-cast, remarkably improved compared to the original:

- Bigger flywheel side bearing

- Material added onto pouring points

- Bigger suction valve

Cankcase design allows fitting of model 200 crankshaft

The original leg cover with PATENTED ANTI-FLAP INFLATABLE SYSTEM (S.G.A.S.): the inflatable chambers on the sides of the cover prevent flapping at high speed.

- Three-layer construction to ensure thermal protection and waterproofing:

- Waterproof heavy Polyamide outer shell and taped seams

- Fully waterproof inner membrane

- Lined interior

- S.G.A.S. anti-flap inflatable system

- Anti-theft metal ring, available for models not requiring screw fixing

- Large storage pocket - Built-in saddle cover

- Built-in saddle cover

- Reflective edging

The original leg cover with PATENTED ANTI-FLAP INFLATABLE SYSTEM (S.G.A.S.): the inflatable chambers on the sides of the cover prevent flapping at high speed.

- Three-layer construction to ensure thermal protection and waterproofing:

- Waterproof heavy Polyamide outer shell and taped seams

- Fully waterproof inner membrane

- Lined interior

- S.G.A.S. anti-flap inflatable system

- Anti-theft metal ring, available for models not requiring screw fixing

- Large storage pocket - Built-in saddle cover

- Built-in saddle cover

- Reflective edging

The original leg cover with PATENTED ANTI-FLAP INFLATABLE SYSTEM (S.G.A.S.): the inflatable chambers on the sides of the cover prevent flapping at high speed.

- Three-layer construction to ensure thermal protection and waterproofing:

- Waterproof heavy Polyamide outer shell and taped seams

- Fully waterproof inner membrane

- Lined interior

- S.G.A.S. anti-flap inflatable system

- Anti-theft metal ring, available for models not requiring screw fixing

- Large storage pocket - Built-in saddle cover

- Built-in saddle cover

- Reflective edging

Coppia di borse laterali rettangolari per Piaggio Ciao, dotate di cinghia.

lunghezza: 330 mm, altezza: 310 mm, larghezza: 110 mm

Main feature: secured under the lamp

Notes: fastening below the plate
Manufacturer: FACO

Specific for Malossi cylinders 3116326 - 3115829

Motor mount -> 34mm-air filter -> 44mm
Max jet -> 82
Min jet -> 35

Check the carb number before buying.

Brand: Dell' Orto
PHBL 24 AD

Biella: 105 mm

Corsa: 57 mm

Spinotto: 15 mm

Size: 2,10x10

TUV homologation, in case of puncture it can be fitted with a traditional tube with no modification.

Includes: M8 nuts and grower washers

Filter size: 80x80mm

Graft diameter: 35.5 mm

Filter size: 94x103mm

Coupling diameter: 42/50/60 mm, decentralized securing system with mounting clamp

Filter size: 95x94mm

Graft diameter: 42/50/60

Filter size: 94x103mm

Coupling diameter: 32/38 mm, decentralized fastening with clamp

Size: L-->700 mm H-->750 mm
Note: includes brackets and mounting instructions

Size--> H 730mm L 725mm, including clamps with chrome plated bars

Completo di staffe

3.50/10

Painted in black color

The PINASCO TOURING muffler was
designed to enhance the performance of the engine both at the bass and at
high revs while maintaining silence. The innovative design
that "goes out of all current patterns" was designed to achieve the
correct expansion of the gases that allows to considerably increase the
engine performance (about 4CV) even in extension.

Painted in black color

The PINASCO TOURING muffler was designed to enhance performance
of the engine both at low and high revs while maintaining the silence. The innovative design that “goes beyond all the current schemes” has been studied to obtain the right gas expansion which allows to significantly increase engine performance (about 4CV) even in extension.

Transparent coating, black anodized silencer.

Painted in black

Black painted

Painted, with aluminium silencer

With cylinder connector

Colore : Azzurro

Colore : Sabbia opaco

SICUREZZA

– Calotta stampata in materiale termoplastico Policarbonato

– Calotta interna in EPS a doppia densità, ad alto assorbimento d’urto– Cinturino con chiusura micrometrica a sgancio rapido

– Quick Release System

VISIBILITÀ

– Visiera trasparente realizzata in Policarbonato, omologata classe A e trattata antigraffio

– Cover visiera in silicone antigraffio

– Visiera esterna scura

– Daytime use only (acquistabile separatamente)

COMFORT

– Progettato con un innovativo Luxury design in termoformatura che riduce le cuciture

– realizzato in microfibra traspirante e anallergica, con inserti in rete Aero 3D

– removibile e lavabile

– Guanciali lavabili e staccabili per uso estivo

– Cinturino con passante sottogola in microfibra antiirritante

– Ampio e confortevole spazio nella zona orecchie

– Neck roll in ecopelle traforata e rete Aero 3D per un’ottima traspirazione e un maggior comfort.

– Design ovale small fit

Colore : Grigio carbone