Clutches, plates, and tools for Vespa
Polini Spring Kit for Clutch (models without variator) Piaggio Ciao-SI-Bravo
Piaggio Ciao, Yes, Bravo
X SPECIAL belt 15.5x8.5x1163 mm - 30° angle transmission Malossi Over Range for Piaggio SI-Bravo
Compatible only with Malossi Over Range transmission on Piaggio SI and Bravo
Clutch pads with springs (3pcs)
Note--> Without variator
Piaggio Ciao-Si-bravo-Boxer
Transmission chain 1/2 x 1/8 S1 HV 410 108 Links Spine Length 8.6 mm adaptable for Piaggio Ciao-Bravo-SI-Grillo-Boxer
Piaggio Ciao-Bravo-SI-Grillo-Boxer
Toothed transmission belt DONGIL pulley assembly Ø 70mm for Piaggio Ciao, Ciao PX
Length: 940mm
Piaggio Ciao, Ciao PX
Transmission belt for Piaggio Ciao without variator
For models WITHOUT VARIATOR
Length: 966 mm
Thickness: 9.8 mm
Height: 8.03 mm
Piaggio Ciao, Bravo, Boxer, Si, Boss
Complete drive pulley without variator
Piaggio Ciao, Bravo, Boxer, Si, Grillo
Drive pulley kit with variator 8 rollers for Ciao/SI/Bravo
Piaggio Ciao, Bravo, Boxer, Si, Grillo
Transmission belt models with variator for PIAGGIO Boxer/Boss/SI/Mix 50cc 2T AC
Measurements:
l=1141 mm
l=13 mm
Carefully check the measurements before purchasing
PIAGGIO Boxer/Boss/SI/Mix 50cc 2T AC
Complete clutch for PIAGGIO CIAO/PX/SI/Bravo/Superbravo/Grillo/Boss 50ccm 2T AC with variator
with clutch bell, transducer
model with variator
PIAGGIO CIAO/PX/SI/Bravo/Superbravo/Grillo/Boss 50ccm 2T AC
Transmission modification kit mm.70 for Piaggio Ciao, Ciao PX
Kit includes: Belt + Pulley mm.70
for models WITHOUT VARIATOR
Piaggio Ciao, Ciao PX
Transmission belt models with variator for Piaggio Bravo
For models WITH VARIATOR
Orig.Ref 130937
Piaggio Bravo
Fly Clutch Drive Pulley Kit Malossi for Ciao/SI/Bravo
The FLY CLUTCH Kit is interchangeable with the original transmission and improves its
performance and durability thanks to high-quality materials and reinforcement where necessary.
For vehicles with variator.
1. Fixed Pulley
This fixed pulley is at 15° with a diameter of 102 mm, gas nitrided for excellent durability, has a positive double “d” mounting on the hub, and is secured with a Zinc-plated M24 nut.
2. Torque Driver
It consists of a 15° pulley with a 102 mm diameter, TIG welded to a specially designed hub with a pressed EKU bushing. EKU is a dry self-lubricating material that ensures excellent sliding behavior and minimal wear.
Also adaptable to the original Piaggio system.
3. Variator contrast spring
These springs, made of high-carbon silicon alloy steel and heat-treated, are dynamically balanced, oven-painted, and designed and calculated for each specific application.
4. Fly Clutch
Fly Clutch consists of three new clutch masses using the Fly Malossi system. Designed
Piaggio Ciao, Bravo, Boxer, Si, Grillo
Reinforced spring kit for clutch (models with variator)
Pre-tempered high load carbon steel springs with high yield strength,
protected by a coating in various colors with high thermal resistance.
The different coloring highlights the load of each series of springs.
Piaggio Ciao, Yes, Bravo
Transmission belt for pulley mm.70-80 for Piaggio Ciao PX
for Pulley mm.70-80 MODIFY
DAYCO Ref. 10A0940C
Piaggio Ciao PX
Drive belt models Without variator for Piaggio SI
For models WITHOUT VARIATOR
Ref.Orig 12493
Piaggio YES