Extractors and related
![](/assets/website/img/motorino/ricambi/classico/motore_fronte.png)
![](/assets/website/img/motorino/ricambi/classico/motore_retro.png)
![](/assets/website/img/motorino/ricambi/moderno/motore_fronte.png)
![](/assets/website/img/motorino/ricambi/moderno/motore_retro.png)
![Variomatic pulley tool SIP for Vespa GTS/GTS Super /GTV/GT60/GT/GT L 125-300ccm ('03-'13/'17-'22)](/images/screenshot-tool-20250121095000.300x300.29735.png)
Variomatic pulley tool SIP for Vespa GTS/GTS Super /GTV/GT60/GT/GT L 125-300ccm ('03-'13/'17-'22)
![good availability good availability](/assets/website/img/disponibilita-buona.jpg)
The fastening tool is necessary to loosen and secure the Vario nut. To do this, the tool is placed on the pulley with the two retaining tabs and screwed into the engine housing via the bushing and the screw. Now you can easily loosen/tighten the nut with a ratchet or torque wrench. No workshop should be without this tool, but it is also advisable to always carry the fastening tool with you during tours. Anyone who has ever tried to change a broken V-belt in the middle of nowhere without a fastening tool will know how important the small fastening tool can be for the Vario.
Vespa 125 GT L ( Euro 3 ) ZAPM31100 4T LC
Vespa 125 GT L ZAPM31101 4T LC
Vespa 125 GT ZAPM31100 4T LC
Vespa 125 GTS Super i.e.ZAPM45300 / ZAPM45301 4T LC
Vespa 125 GTS Super Sport ZAPM45300 4T LC
Vespa 125 GTS ZAPM31300 4T LC
Vespa 125 GTV ZAPM31301 4T LC
Vespa 200 GT 60° i.e. ZAPM45102 4T LC
Vespa 200 GT L ZAPM31200 4T LC
Vespa 200 GT ZAPM31200 4T LC
Vespa 250 GTS i.e. ABS ZAPM45101 4T LC
Vespa 250 GTS i.e. ZAPM45100 4T LC
Vespa 250 GTV i.e.
![VMC key locks clutch basket and pinion for Vespa 50/90/125/Primavera//ET3/PK50-125/S/XL/XL2](/images/screenshot-tool-20250107165041-photoroom.300x300.29624.jpg)
VMC key locks clutch basket and pinion for Vespa 50/90/125/Primavera//ET3/PK50-125/S/XL/XL2
![good availability good availability](/assets/website/img/disponibilita-buona.jpg)
Vespa 50 V5A1T N,L,R
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
![Gear tree assembly tool for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2/125 V1-GTR 2°/TS 2°/150 VL-Sprint V2°/Super 2°/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa](/images/attrezzo-sip-albero-cambio-albero-motore-montaggio.300x300.24004.jpg)
Gear tree assembly tool for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2/125 V1-GTR 2°/TS 2°/150 VL-Sprint V2°/Super 2°/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
![good availability good availability](/assets/website/img/disponibilita-buona.jpg)
M16x1.25, M14x1.5, M12x1.5, M12x1.25, RH M10x1.5, LH M10x1.5 mm
10 parts
Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2/125 V1-GTR 2°/TS 2°/150 VL-Sprint V2° /Super 2°/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
![Universal flywheel puller tool, 6 tools in 1](/images/dsc0358.300x300.17105.jpg)
Universal flywheel puller tool, 6 tools in 1
![spent spent](/assets/website/img/disponibilita-esaurito.jpg)
Verify compatibility independently
![USAG 907-S stroboscopic gun USAG 907-S stroboscopic gun](/images/71blefk3q9l-sl1500.300x300.10895.jpg)
USAG 907-S stroboscopic gun
![good availability good availability](/assets/website/img/disponibilita-buona.jpg)
For stroboscopic visualization of timing marks
Usable on 4 or 2 stroke engines up to two sparks per revolution.
L 310 x W 285 x H 110 mm
12-month warranty
Supplied in a plastic case complete with cables and rubber shockproof cap and connection clamps
All models
![Replacement weights for extractor 07-FQ-055-IR flywheel side bearing 25X38X15 mm for Vespa PK125 S 2°/ETS/N/XL/XL2/125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa](/images/massette-sostitutive-per-estrattore-anello-di-tenu.300x300.24015.jpg)
Replacement weights for extractor 07-FQ-055-IR flywheel side bearing 25X38X15 mm for Vespa PK125 S 2°/ETS/N/XL/XL2/125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
![good availability good availability](/assets/website/img/disponibilita-buona.jpg)
D. 29 mm
Vespa 125 GTR VNL2T 145901>
Vespa 125 PX
Vespa 125 TS VNL3T 18139>
Vespa 125 PK ETS VMS1T
Vespa 125 PK
Vespa 150 Super VBC1T 412374>
Vespa 150 Sprint Veloce VLB1T 0294260>
Vespa 150 PX
Vespa 200 Rally VSE1T 0033997>
Vespa 200 PE
![Silent-block assembly/disassembly tool for Vespa 125 VNA–TS/150 VBA-T4/160 GS/180 SS/Rally/PX80-150/PE/Lusso/'98/MY/'11/T5/Cosa](/images/attrezzo-silent-block-braccio-motore-per-il-montag.300x300.24293.jpg)
Silent-block assembly/disassembly tool for Vespa 125 VNA–TS/150 VBA-T4/160 GS/180 SS/Rally/PX80-150/PE/Lusso/'98/MY/'11/T5/Cosa
![good availability good availability](/assets/website/img/disponibilita-buona.jpg)
Vespa 125 VNA–TS/150 VBA-T4/160 GS/180 SS/Rally/PX80-150/PE/Lusso/'98/MY/'11/T5/Cosa
![Replacement weights for extractor 07-FQ-055-IR flywheel side bearing ring also suitable for Vespa 160 GS/180 SS/180-200 Rally 1°](/images/screenshot-2023-10-27-at-15-39-54-massette-sostitu.300x300.26664.png)
Replacement weights for extractor 07-FQ-055-IR flywheel side bearing ring also suitable for Vespa 160 GS/180 SS/180-200 Rally 1°
![good availability good availability](/assets/website/img/disponibilita-buona.jpg)
Vespa 160 GS/180 SS/180-200 Rally 1st
![SIP extractor tool for roller cage gear shaft for Vespa 50/90/125/Primavera//ET3/PK50-125/S/XL/XL2](/images/screenshot-2023-10-19-at-10-08-52-estrattore-sip-p.300x300.26201.png)
SIP extractor tool for roller cage gear shaft for Vespa 50/90/125/Primavera//ET3/PK50-125/S/XL/XL2
![good availability good availability](/assets/website/img/disponibilita-buona.jpg)
Vespa 50 V5A1T N,L,R
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
![Prolite Stroboscope Gun 6V / 12 Volt - Xenon](/images/mn912-mn912-c1.300x300.25858.jpg)
Prolite Stroboscope Gun 6V / 12 Volt - Xenon
![availability low availability low](/assets/website/img/disponibilita-scarsa.jpg)
The ignition timing is important for the thermal health of the
engine and for delivering all the power. If the
engine is rebuilt, you should not rely on existing marks for
ignition adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5, etc.) The 6 and 12 volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12 Volt power source (e.g., a car battery) is always needed if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of fixed markers even at speeds over 8000 rpm in the near field.
The gun is connected to a 12 volt battery via the alligator clips and the inductive clip on the spark plug cable (without direct contact with the wire)
All models
![Clutch Group Extractor Tool for Vespa 50/90/125/Primavera//ET3/PK50-125/S/XL/XL2](/images/strumento-estrattore-gruppo-frizione.300x300.2589.jpg)
Clutch Group Extractor Tool for Vespa 50/90/125/Primavera//ET3/PK50-125/S/XL/XL2
![good availability good availability](/assets/website/img/disponibilita-buona.jpg)
Vespa 50 V5A1T N,L,R
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
![Flywheel puller tool M28x1 for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2/125 GT-TS/150 GL-Super/200 Rally/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa](/images/dsc1192.300x300.6435.jpg)
Flywheel puller tool M28x1 for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2/125 GT-TS/150 GL-Super/200 Rally/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
![good availability good availability](/assets/website/img/disponibilita-buona.jpg)
Size: 28x1
Vespa 50
Vespa 50 PK
Vespa 125 PK/S/XL/
Vespa 125 ET3
Vespa 125 GT/TS
Vespa 150 GL/Super
Vespa 180/200 Rally
Vespa PX/PE/T5/Cosa
![Prolite TRISCO Stroboscope Gun 6V / 12 Volt - Xenon](/images/mn911b-mn911b-1.300x300.23047.jpg)
Prolite TRISCO Stroboscope Gun 6V / 12 Volt - Xenon
![availability low availability low](/assets/website/img/disponibilita-scarsa.jpg)
The ignition timing is important for the thermal health of the
engine and for delivering full power. If you rebuild the
engine, you should not rely on existing marks for
ignition adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5 etc.) 6 and 12-volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12-volt power source (e.g. a car battery) is always needed if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of the fixed markers even at speeds over 8000 rpm in the near field.
The gun is connected to a 12-volt battery via the crocodile clips and the inductive clip on the spark plug cable (without direct contact
with the wire)
All models
![Crankshaft disassembly tool clutch side Vespa 50 N/L/R- Special-125/PV/ET3/PK50-125/S/SS/XL/XL2](/images/dsc0494.300x300.12561.jpg)
Crankshaft disassembly tool clutch side Vespa 50 N/L/R- Special-125/PV/ET3/PK50-125/S/SS/XL/XL2
![good availability good availability](/assets/website/img/disponibilita-buona.jpg)
Vespa 50 N/L/R- Special-125/PV/ET3/PK50-125/S/SS/XL/XL2
![Prolite Stroboscope Gun 6V / 12 Volt - Xenon](/images/mn922-mn922.300x300.16559.jpg)
Prolite Stroboscope Gun 6V / 12 Volt - Xenon
![good availability good availability](/assets/website/img/disponibilita-buona.jpg)
The ignition timing is important for the thermal health of the
engine and for delivering full power. If you rebuild the
engine, you should not rely on existing marks for ignition
adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5, etc.) The 6 and 12 volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12 Volt power source is always required (e.g. a car battery) if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of the fixed markers even at speeds above 8000 rpm in the near field.
The gun is connected to a 12-volt battery via the crocodile clips and the inductive clip on the spark plug wire (without direct contact with the wire)
All models
![](/assets/website/img/big-loading.gif)