>
Spare Parts and Accessories
>
Classico
>
Engine and parts
>
Seals and gaskets
>
Wheel hub oil seal 27x42x10 mm for Vespa 125 V1-15/V30-33/VN/VM/150 VL/VB1-PX 125/150/200 '98'MY'11/T5/Cosa
- Safe payment
- Easy return
- Spedizione gratuita a partire da €:
-
Customer care service +39 0543 85540From Monday to Friday: 9.00-12.30 and 14.00-17.30
Saturday: 9.00-12.00
Wheel hub oil seal 27x42x10 mm for Vespa 125 V1-15/V30-33/VN/VM/150 VL/VB1-PX 125/150/200 '98'MY'11/T5/Cosa
item code: 07-CL-023-ME
Shipping time:
24/48 hours
The oil seal is a very important component when discussing engine seals. For optimal performance, the seal on the crankshaft must be perfect, which is achieved thanks to a spring inside the oil seal lip. Over time, it loses elasticity, and as it wears out, the engine will draw in air, compromising its operation (irregular RPM, lack of idle stability). It is recommended to replace them with high-end products in Viton, PTFE, Corteco, Ariete, Rolf, Malossi to ensure good performance and keep you away from problems. RDV TIP: ALWAYS check that the seal on the shaft is optimal, even by simply testing it by hand before positioning it. If not, also check the crankshaft.
Modelli
models 125cc
Vespa 98 V.98
, Vespa 125
, Vespa 125 V1T-V15T
, Vespa 125 V30T-V33T
, Vespa 125 U VU1T
, Vespa 125 VM1T
, Vespa 125 VM2T
, Vespa 125 VN1T
, Vespa 125 VN2T
models 150cc
Vespa 150
, Vespa 150 VL1T
, Vespa 150 VL2T
, Vespa 150 VL3T
, Vespa 150 VB1T
Richiedi informazioni