>
Spare Parts and Accessories
>
Classico
>
Engine and parts
>
Seals and gaskets
>
Wheel hub oil seal ROLF 27x47x6 mm for Vespa 125 GT 2°/GTR 2°/TS/150 Sprint 2°/V 2°/200 Rally/P80-150X/P200 E 1°/PX80-200E 1°
- Safe payment
- Easy return
- Spedizione gratuita a partire da €:
-
Customer care service +39 0543 85540From Monday to Friday: 9.00-12.30 and 14.00-17.30
Saturday: 9.00-12.00
Wheel hub oil seal ROLF 27x47x6 mm for Vespa 125 GT 2°/GTR 2°/TS/150 Sprint 2°/V 2°/200 Rally/P80-150X/P200 E 1°/PX80-200E 1°
item code: 07-CL-018-ME
Shipping time:
24/48 hours
Istruzioni per il montaggio
The oil seal is a very important element when we talk about engine seals. For optimal performance, the seal on the crankshaft must be perfect and this is achieved thanks to a spring inside the oil seal lip. Over time, it loses elasticity and wears out, causing the engine to draw in air and compromising its operation (irregular RPM, lack of idle seal). It is recommended to replace them with high-end products in Viton, PTFE, Corteco, Ariete, Rolf, Malossi to ensure good performance and keep you away from problems. RDV TIP: ALWAYS check that the seal on the shaft is optimal, even by simply testing it by hand before positioning it; if not, also check the crankshaft.
Modelli
models 125cc
Vespa 125
, Vespa 125 GT R VNL2T
, Vespa P 125 X VNX1T
, Vespa PX 125 E VNX2T
models 150cc
Vespa 150
, Vespa P 150 X VLX1T
, Vespa PX 150 E VLX1T
models 200cc
Vespa 200
, Vespa 200 Rally VSE1T
, Vespa P 200 E VSX1T
, Vespa PX 200 E VSX1T
Richiedi informazioni